TracePro在“光的偏振实验”中的应用

为提高光的偏振实验教学效果和教学质量,在教学中引入专业的光学设计软件--TracePro,利用该软件仿真了光的双折射过程和现象,以及偏振片的原理;建立光的偏振实验系统实体模型,完成光的偏振态判断实验;仿真光通过波片后的偏振态转换现象;验证马吕斯定律,并仿真了多层介质膜对光的分离和旋光现象.结果表明该方法可以提高教学效率,激发学生探索科学的主观能动性,仿真结论与理论推导和实际实验结果一致.     

无水坝抽水蓄能系统高压溶气问题研究

无水坝抽水蓄能系统利用封闭容器内的高压气体构建虚拟水坝,是兼具压缩空气储能和抽水蓄能优点的新型储能系统。但该系统的封闭容器内水和气在高压状态共存有可能造成水中溶气,从而对水轮机造成汽蚀等破坏。本文采用实际气体状态方程及分子动力学模拟方法,研究了宽广的压力、温度范围下气体在水中的溶解及扩散规律,揭示了水中气体溶解量随时间和水深的变化规律。研究结果表明释能结束后保证水-气共容舱内剩余水的高度大于0.5 m时,高压溶气不会对水轮机产生危害,该结论对系统的工程应用及推广具有指导意义。     

Nd∶YVO4/Nd∶GdVO4双波长激光器的功率均衡实验研究

实验研究了Nd∶YVO4/Nd∶GdVO4双波长激光器在不同抽运功率条件下,通过调节热沉温度达到功率均衡时的输出特性.实验结果表明:对于Nd∶YVO4/Nd∶GdVO4双波长激光器,当提高抽运功率,需要重新降低热沉温度达到功率均衡输出,降温幅度与抽运功率增加之比为11.23℃/W.与此同时,随着抽运功率和热沉温度的变化,双波长激光器的中心波长会出现小幅度的漂移,左峰波长随抽运功率增加的蓝移速率为0.056 nm/W,右峰波长随抽运功率增加的蓝移速率为0.054 nm/W.实验还发现功率均衡条件下激光器的输出总功率随抽运功率的增加而增加,拟合斜效率为8.7%,当抽运功率为5.58 W时,输出最大总功率达到115.7 mW.     

对称理论在解若干非线性问题中的应用

将摄动理论和对称约化理论结合起来对研究扰动非线性方程具有重要的意义. 本文利用近似对称约化理论研究了扰动mKdV方程, 得到了该方程的各阶近似约化方程和级数约化解. 本文还讨论了同伦近似对称方法在求解不可积系统中的应用以及利用对称和守恒律的关系求解非线性系统的无穷多守恒律等问题.     

Existence and uniqueness of the entropy solution of a stochastic conservation law with a Q-Brownian motion

In this paper, we prove the existence and uniqueness of the entropy solution for a first-order stochastic conservation law with a multiplicative source term involving a $Q$-Brownian motion. After having defined a measure-valued weak entropy solution of the stochastic conservation law, we present the Kato inequality, and as a corollary, we deduce the uniqueness of the measure-valued weak entropy solution, which coincides with the unique weak entropy solution of the problem. The Kato inequality is proved by a doubling of variables method; to that purpose, we prove the existence and the uniqueness of the strong solution of an associated stochastic nonlinear parabolic problem by means of an implicit time discretization scheme; we also prove its convergence to a measure-valued entropy solution of the stochastic conservation law, which proves the existence of the measure-valued entropy solution.     

Comparative study of optical analysis methods for thin films

Three popular optical analysis methods (the transfer-matrix method, the Tinkham formula, and Beer's law) have been used for analyzing the optical spectra of thin films. While the transfer-matrix method is an accurate method, the Tinkham formula and Beer's law are approximate methods. Here we investigated the three methods using measured transmittance spectra of insulating transition-metal dichalcogenide (TMD) thin films on a quartz substrate. Three different semiconducting 2H-TMD systems (MoS₂, MoSe₂, and MoTe₂) were measured and analyzed. The optical conductivities obtained from the measured transmittance spectra using the transfer-matrix method and Tinkham formula and the absorption coefficients obtained using the transfer-matrix method and Beer's law were compared. The comparisons show some discrepancies. The reasons for the discrepancies between the results obtained via the two different methods were examined and the application limitations of the Tinkham formula and Beer's law were discussed.     

Acoustoelastic effect simulation by time–space finite element formulation based on quadratic interpolation of the acceleration

Acoustoelastic effect describes the change of ultrasound velocity due to the initial stress. Its simulation involves a numerical analysis of nonlinear elastodynamics and requires high accuracy in the time domain. A time–space finite element formulation, derived from the quadratic interpolation of the acceleration within a time segment, is proposed for an accurate simulation of the acoustoelastic effect in the present study. Ten different integration schemes are generated based on this formulation and nine of them are found to be conditionally stable. Among the nine stable schemes, one is found to obtain a spectral radius of one when the normalized step ratio is less than 5.477, indicating no numerical dissipation or numerical divergence. Compared with integration schemes from previous studies, this integration scheme demonstrates better performance in calculation accuracy and energy conservation. A two-stage approach, namely the static stage and the dynamic stage, has been employed in the simulation of the acoustoelastic effect. The former stage is adopted to obtain the initial stress and the latter stage, where the proposed integration scheme is implemented, is adopted to simulate the ultrasound propagation in an initial stress state. The simulation results of the dynamic stage show that the ultrasound velocity increases in a compression stress state and decreases in a tension stress state for aluminum alloy, which is in good agreement with previous experimental studies. Together with the simulation result of the static stage, it is conjectured that the acoustoelastic effect results from the stress-dependent elastic modulus.     

Modified two-grid method for solving coupled Navier-Stokes/Darcy model based on Newton iteration

A new decoupled two-gird algorithm with the Newton iteration is proposed for solving the coupled Navier-Stokes/Darcy model which describes a fluid flow filtrating through porous media. Moreover the err...     

A statistical analysis of power-level-difference-based dual-channel post-filter estimator

By deriving the explicit expression of the probability density function (p.d.f.), this paper presents a statistical analysis of the power-level-difference-based dual-channel post-filter (PLD-DCPF) estimator. The derivation is based on the joint p.d.f. of the auto-spectra of a two-dimensional stationary Gaussian process with mean zero, where the theoretical expression is verified by numerical simulations. Using this theoretical p.d.f. expression, this paper studies the impacts of the correlative parameters on the amount of noise reduction and speech distortion. According to both the theoretical analysis results and the simulation results, four schemes are proposed to improve the performance of the traditional PLD-DCPF estimator.